Custom Design and Fabrication
Categories Products Center
Contact us
ZHEJIANG JHENTEN MACHINERY CO.,LTD.
Tel：+86-577-86867777
Fax：+86-577-86810195
E-mail：info@jhenten.com
SINGLE EFFECT FALLING FILM EVAPORATOR
-
Single effect evaporator: this equipment adopts down falling film evaporation type. construction: evaporator, separator, condenser etc. Use popularly used for concentrating and dehydration in food, biology engineering, pharmacy,organic solvents and chemistry etc. Automatic control: manual operated and full auto control.
Dimensions
Application
Single effect evaporator: this equipment adopts down falling film evaporation type. construction: evaporator, separator, condenser etc. Use popularly used for concentrating and dehydration in food, biology engineering, pharmacy,organic solvents and chemistry etc. Automatic control: manual operated and full auto control.Characteristics
1.Full closed process, fast and low temperature evaporation;
2 Heating fast with high efficiency and hard to produce the deposit on the machine's inside wall;
3.Large scale of the concentrate ratioas the products between the different effecs can recycle separately, so the concentrate ratio can be regulated in large scale;
4.The machine attach with spraying ball and self CIP system.
Techincal Parameter
|
Project |
SJM-100 |
SJM-200 |
SJM-400 |
SJM-600 |
SJM-800 |
SJM-1000 |
SJM-1200 |
|
Ethanol evaporation capacity (kg/h) |
100 |
200 |
400 |
600 |
800 |
1000 |
1200 |
|
A. Heating source medium: steam |
|
|
|
|
|
|
|
|
Raw steam pressure (Mpa) |
0.085 ( Absolute pressure) |
||||||
|
Steam heat consumption (kcal/h) |
30000 |
60000 |
120000 |
180000 |
240000 |
300000 |
360000 |
|
B. Heating source medium: heat transfer oil |
|
|
|
|
|
|
|
|
Heat transfer oil inlet and outlet temperature (℃) |
120—130/100—110 |
||||||
|
Heat consumption of heat transfer oil (kcal/h) |
31000 |
62000 |
124000 |
186000 |
248000 |
310000 |
372000 |
|
Working pressure of heat transfer oil (Mpa) |
0.15—0.20 |
||||||
|
Evaporation temperature (℃) |
65—75 |
||||||
|
Ethanol discharge temperature (℃) |
35—40 |
||||||
|
Concentrate discharge temperature (℃) |
63—73 |
||||||
|
Vacuum (-Mpa) |
0.065—0.077 |
||||||
|
Heating area (㎡) |
3.0 |
6.0 |
12 |
18 |
24 |
30 |
36 |
|
Condensing area (㎡) |
6.0 |
12 |
24 |
36 |
48 |
60 |
72 |
|
Condenser working pressure (Mpa) |
0.20—0.25 |
||||||
|
Cooling area (㎡) |
2.0 |
3.0 |
4.0 |
5.0 |
6.0 |
8.0 |
10 |
|
Cooler working pressure (Mpa) |
0.15—0.20 |
||||||
|
Cooling water circulation (t/h) |
3.8 |
7.6 |
17 |
24 |
32 |
39 |
47 |
|
Cooling water working pressure (Mpa) |
0.20—0.25 |
||||||
|
Cooling water inlet and outlet temperature (℃) |
32—35/40-43 |
||||||
|
Chilled water consumption (Kcal/h) |
1500 |
3000 |
6000 |
9000 |
12000 |
15000 |
18000 |
|
Chilled water inlet and outlet temperature (℃) |
10—20/18—28 |
||||||
|
Chilled water working pressure (Mpa) |
0.15—0.20 |
||||||
|
Total installed power (kw/h) |
3.75 |
5.55 |
6.6 |
8.7 |
10.7 |
12.5 |
14.25 |
