Custom Design and Fabrication
Categories Products Center
Contact us
ZHEJIANG JHENTEN MACHINERY CO.,LTD.
Tel：+86-577-86867777
Fax：+86-577-86810195
E-mail：info@jhenten.com
JTGLD Multi Fluid Sanitary Filter Housing
-
Medium & Small Flow Rate Sanitary Filter
JTGLD Multi Fluid Sanitary Filter Housing can meet requirement of medium & small flow rate.
Product Options
Dimensions
The structure design and manufacture in accordance with the sanitary grade. It's no dead corner, meet " GMP" standard , easy to clean, drain thoroughly, no residual liquid.
For the application of some very harsh cleaning, the filter faceplate made of detachable, full angle cleaning
Feature
The ultra high level of polishing, the inner surface polished to 0.3μm Ra. the outer surface to reach 0.4μm, the absolute hygienic level polishing.
The ultra high level of polishing, the inner surface polished to 0.3μm Ra. the outer surface to reach 0.4μm, the absolute hygienic level polishing.
Small specification filter installation adjusting nut at the bottom of the Stabilizer blade, can adjust the height of the filter, easy to use
Application
Pharmaceutical industry: all kinds of antibiotics and other liquid filtration.
Food and beverage industry: wine , mineral water, drinking water filtration.
Oil industry: oil field water injection filtration
Electronics industry: high purity water filtration
Chemical industry: all kinds of organic solvent, acid, lye filtration.
Surface Finish
|
Polishing precision |
Inner surface Ra≤0.3μm , |
Operating Conditions
|
Max Operating pressure |
0.6MPa、1.0MPa |
|
Max Operating Temp. |
150℃ |
|
Sterilization |
Online or steam sterilization： |
Material
|
Vent valve, drain valve |
304, 316L |
|
Eyebolt |
304 |
|
Stabilizer blade |
304 |
Connection
|
Shell connection |
Flange ( Eyebolt) |
|
Pressure gauge N3 (Optional) |
1.5" tri-clamp |
|
Vent valve N4 (optional ) |
1/2" tri-clamp |
|
Drain valve N5 (optional ) |
1/2" tri-clamp |
Structure
|
Dimension Parameters |
3R(4R) |
5R(6R) |
7R(8R) | |||||||||
|
10” |
20” |
30” |
40” |
10” |
20” |
30” |
40” |
10” | 20” | 30” | 40” | |
|
A：Total height (excluding pressure gauge) |
760 |
1010 |
1260 |
1510 |
780 |
1030 |
1280 |
1530 |
805 | 1055 | 1305 |
1555 |
|
B：The distance from inlet to center |
160 |
160 |
200 |
|||||||||
|
C：Diameter |
Φ204 |
Φ235 |
Φ273 |
|||||||||
|
D：The height from in-outlet N1, N2 to the ground |
200 |
200 |
200 |
|||||||||
|
E：The height from drain valve N5 to the ground |
130 |
130 |
130 |
|||||||||
|
In-outlet N1, N2 dimension |
1.5” |
2” |
1.5” |
|||||||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
