Dimensions
JTGSF Multi Fluid Industrial Filter is precision filter which is specially designed for industrial field , It can be applied for various chemical materials and meet the requirements of different flow.The filter housing using side entry & bottom out flow method, it ensure that the material liquid does not overflow when replace cartridge in process.The filter housing can be design to three-stage structure, shell can be opened from top and bottom,the filter can be absolutely disassemble. For the application of some very harsh cleaning,the filter can full angle cleaning.
JTGSF Multi Fluid Industrial Filter Housing use many times polishing process, ensure that the material liquid contact surface Ra reached 0.6μm close to the sanitary requirement , the filter polished is mirror polished. It can be applied in high precision liquid filtration.
Feature Filter can be made into the form of top and bottom openings, that is convenient to replace the filter, and can achieve thorough cleaning
The filter faceplate can be made into a detachable type, to achieve thorough cleaning
Equipped with two drain vent, respectively in the top of the disk and the bottom of the filter, drain convenient and completely
Side in and bottom out ,this design to ensure that the liquid can be completely drain, at the same time using the tangent export options, making sewage discharge thoroughly, worker is easy to Operating
More than 15 cartridges filter housing can used the design of swing arm + eyebolt or quick-open , easy to Operating, economical and practical
Application
Water Finish: all kinds of water filtration
Food &beverage: wine, mineral water, drinking water filtration
Chemical industry: all kinds of organic solvents, acid, alkali, filtration
Surface Finish
| polishing precision |
Inner surface Ra≤0.6μm , Outside surface Ra≤0.8μm. |
Operating Conditions
| Max Operating pressure | 0.6MPa、1.0MPa |
| Max Operating Temp. | 150℃ |
Material
| Vent valve , drain valve | 304, 316L |
| Eyebolt | 304 |
| Stabilizer blade | 304 |
Connection
| Shell connection | Flange (Eyebolt) |
| In-outlet N1, N2 | Tri-clamp |
| Pressure gauge N3 | 1.5”Tri-clamp |
| Vent valve N4 (optional) |
1/2” Tri-clamp (less than 12pcs) 1.5” Tri-clamp (more than 15pcs) |
| Drain valve N5(optional) | 1” Tri-clamp |
| Cartridges connection | 222 type, 226 type, DOE type |
DOE type cartridge
| Dimension Parameters | 3pcs(4pcs) | 5pcs(6pcs ) | ||||
| 20” | 30” | 40” | 20” | 30” | 40” | |
| A：Total height ( excluding pressure gauge) | 1123 | 1373 | 1623 | 1145 | 1395 | 1645 |
| B：The distance from inlet to center | 142 | 165 | ||||
| C：Diameter | Φ204 | Φ250 | ||||
| D1: The height from inlet N1 to the ground | 540 | 660 | ||||
| D2：The height from outlet N2 to the ground | 300 | 300 | ||||
| In-outlet N1, N2 dimension | 1.5”/2” | 1.5”/2”/2.5” | ||||
| 7pcs | 8pcs | 9pcs(10pcs) | 12pcs(11pcs) | ||||||||
| 20” | 30” | 40” | 20” | 30” | 40” | 20” | 30” | 40” | 20” | 30” | 40” |
| 1145 | 1395 | 1645 | 1170 | 1420 | 1670 | 1170 | 1420 | 1670 | 1170 | 1420 | 1670 |
| 176.5 | 190 | 202.5 | 215 | ||||||||
| Φ273 | Φ300 | Φ325 | Φ350 | ||||||||
| 660 | 660 | 660 | 660 | ||||||||
| 300 | 300 | 300 | 300 | ||||||||
| 1.5”/2”/2.5” | 1.5”/2”/2.5”/3” | 1.5”/2”/2.5”/3” | 1.5”/2”/2.5”/3” | ||||||||
The above-mentioned data is the standard, it can customize according to customer's requirements
| Dimension Parameters | 3pcs(4pcs/5pcs) | 6pcs | ||||
| 20” | 30” | 40” | 20” | 30” | 40” | |
| A：Total height ( excluding pressure gauge) | 1123 | 1373 | 1623 | 1123 | 1373 | 1623 |
| B：The distance from inlet to center | 142 | 149.5 | ||||
| C：Diameter | Φ204 | Φ219 | ||||
| D1: The height from inlet N1 to the ground | 530 | |||||
| D2：The height from outlet N2 to the ground | 300 | 300 | ||||
| In-outlet N1, N2 dimension | 1.5”/2” | 1.5”/2”/2.5” | ||||
| 7pcs(8pcs) | 9pcs | 10pcs(11pcs/12pcs) | ||||||
| 20” | 30” | 40” | 20” | 30” | 40” | 20” | 30” | 40” |
| 1163 | 1413 | 1663 | 1170 | 1420 | 1670 | 1170 | 1420 | 1670 |
| 165 | 176.5 | 190 | ||||||
| Φ250 | Φ273 | Φ300 | ||||||
| 650 | ||||||||
| 300 | 300 | 300 | ||||||
| 1.5”/2”/2.5” | 1.5”/2”/2.5”/3” | 1.5”/2”/2.5”/3” | ||||||
The above-mentioned data is the standard, it can customize according to customer's requirements.
| Dimension Parameters | 15pcs(18pcs) | 21pcs | 24pcs(27/30pcs) |
| 40” | 40” | 40” | |
| A：Total height ( excluding pressure gauge) | 1947 | 1959 | 2026 |
| B：The distance from inlet to center | 240 | 265 | 290 |
| C：Diameter | Φ400 | Φ450 | Φ500 |
| D1: The height from inlet N1 to the ground | 682 | 694 | 714 |
| D2：The height from outlet N2 to the ground | 300 | ||
| In-outlet N1, N2 dimension | 3”/3.5”/4” | ||
| 36pcs | 42pcs | 48pcs (54pcs) | 56pcs |
| 40” | 40” | 40” | 40” |
| 2036 | 2044 | 2067 | 2162 |
| 315 | 340 | 365 | 390 |
| Φ550 | Φ600 | Φ650 | Φ700 |
| 729 | 734 | 744 | 808 |
| 300 | 350 | ||
| 3”/3.5”/4” | |||
The above-mentioned data is the standard, it can customize according to customer's requirements.